The range consists of two sizes. Both versions are available in four colours. The light from the LEDs is distributed onto the cover glass by a prismatic lens. The large size luminaires are also available in versions for a mains voltage of 230/240V. The necessary control gear can be used to supply a maximum of 40 luminaires at 12V or a maximum of 10 luminaires at 30V.
Application
Primarily as directly emitting, white or coloured points of light. Applications include: identification of architectural lines, stair treads, restricted areas or to mark entrances and routes, especially escape routes.
Primarily as directly emitting, white or coloured points of light. Applications include: identification of architectural lines, stair treads, restricted areas or to mark entrances and routes, especially escape routes.
This range also features two sizes which have been equipped with two-colour LEDs. Dynamic colour changes can be generated with the control gear designed for this purpose. The control gear for luminaires with dynamic colour change can beset for simple switching and also for dimming, pulsating and flashing , in three speeds. The light from the LED is distributed onto the cover glass by a prismatic lens.
Application
Primarily as directly emitting, white or coloured points of light. Applications include: identification of architectural lines, stair treads, restricted areas or to mark entrances and routes especially escape routes, by using switchable colours or dynamic colour changes, e. g. , as a chaser light.
Primarily as directly emitting, white or coloured points of light. Applications include: identification of architectural lines, stair treads, restricted areas or to mark entrances and routes especially escape routes, by using switchable colours or dynamic colour changes, e. g. , as a chaser light.
Characteristic of the varychrome version is the use of coloured LEDs (red, green and blue). Control gear is available as 1V-10V version for control via a conventional ERCO lighting control or as DALI versions for control with the ERCO Light System DALI. This allows almost limitless colours to be generated.
Application
Primarily as directly emitting, white or coloured points of light. Applications include: identification of architectural lines, stair treads, restricted areas or to mark entrances and routes especially escape routes, with smooth, dynamic colour changes, e. g., as a chaser light.
Primarily as directly emitting, white or coloured points of light. Applications include: identification of architectural lines, stair treads, restricted areas or to mark entrances and routes especially escape routes, with smooth, dynamic colour changes, e. g., as a chaser light.
In the larger version, LED floor washlights are available for wall mounting. The upper half of the vertically mounted, round front lens is available in the four colours mentioned. In each case, the lower half contains white LED's and an aluminium vaporised plastic reflector.
Application
Direct beam, asymmetrical light distribution, to illuminate or identify walkways, hallways and stairs in buildings such as hotels, theatres, cinemas and concert halls.
Direct beam, asymmetrical light distribution, to illuminate or identify walkways, hallways and stairs in buildings such as hotels, theatres, cinemas and concert halls.